Centrihome.com is fully supported by its audience. When you purchase through links on our website, we may earn an affiliate commission. Learn more

American Standard Touchless Toilet Problems

How cool is a touchless toilet? The fact that you do not have to exert effort to flush your toilet or even touch germs as you do it is perhaps some of the things you will appreciate about this kind of toilet. It is also a water-saving model, so you get to save your coins.

Sounds good, but is it all fun and games when it comes to this toilet? No, it’s not. Unfortunately, you may find yourself dealing with American standard touchless toilet problems. It could be anything from flushing issues to leakages, but there’s no need to fret.

In this guide, we will get into some of the problems you are likely to encounter and how to fix them.

Common Problems of American Standard Touchless Toilet

Malfunctioning Fill Valve

One of the most common issues with the American standard touchless toilet is a malfunctioning fill valve. The fill valve is what allows water to enter the tank of your toilet in order to flush out waste. If it leaks, water will come out of the toilet and consequently cause flooding.

Another problem you are set to encounter with a faulty fill valve is that your toilet will constantly be flushing or not flush at all. Of course, neither of the two is preferable. With the former, you will lose a lot of water, while with the latter, you will be stuck with a dirty toilet.

The best way to fix this problem is to have the fill valve repaired. However, you may want to keep in mind that, in many cases, repairing a leaking valve can sometimes require replacing it altogether.

Faulty Water Levels

With the American Standard touchless toilet, you may experience issues with the water levels. When this happens, the toilet will not flush properly or completely. This may be caused by several reasons, including a clogged valve or broken solenoid.

To fix this issue, you could simply adjust the water level, but sometimes that doesn’t suffice, and it only means there is a more serious problem. As such, you want to look for any obvious signs of water leakage. If there are none, then you should check inside the tank and make sure that it is not leaking from there.

If there is no visible leak, then you may need to contact a professional plumber to help with your problem.

Loose Wire Connection

If you notice water leaking from the tank, then you should check for a loose connection between the tank and the bowl. The problem could be caused by any number of different issues, including a corroded or damaged connection.

To check for this, you’ll need to remove the toilet seat and look for any signs of water leaking out of the tank.

If there are no signs of leakage, then it’s likely that there are simply some parts missing or broken. If this is the case, then you will need a replacement. When buying new parts, make sure they are compatible with your toilet and that they are installed correctly in order to avoid future problems.

Continuous Running of Water

If you have a continuously running water problem with your American standard touchless toilet, you may be able to fix it yourself.

If you notice that the toilet is constantly running, this could be one of several problems. A leaky flapper might be causing the problem and would need to be replaced. If your flapper is working properly, then it could be that the water valve is stuck or damaged.

First, you need to check whether the water valve is broken or not. If it is broken, then you will have to replace it with a new one. You can do this by yourself if you have basic plumbing knowledge. However, if you are not sure about how to fix this problem, then you can call an expert plumber who will be able to help you with this issue.

Another thing you want to do is make sure that your toilet tank is clear of any clogs or debris. Flush out any items that are stuck in the overflow tube of your tank by reaching into it and pulling them out with your hand or a pair of tongs.

Failure to Flush

The American Standard toilet may fail to flush. As you can imagine, that will leave you with a whole lot of waste in your toilet bowl, which is not only gross to look at, but will have your premises smelling horrible.

To fix that problem, you first have to turn off the main water supply to ensure that there’s no water in your way while you are working. It also saves you the trouble of having to clean up in case flooding occurs.

Next, you want to open the toilet tank as this will allow you to see inside where you can locate the Flush Control Module. Once this is done, remove the wire linked to the “Flush Control Module” and connect it to the “Hand Sensor Module.”

After this, you want to check all the parts to see if they are functioning well or not. If they are, the next step involves securing the wire to the hand sensor module.

At this point, you are done. Therefore, you want to put the lid of the toilet tank back in its place and turn the water supply back on.


How does a touchless toilet work?

Unlike regular toilets, where you have to press a button or lift a handle to flush, this one uses motion detection. You simply place your hand over a sensor on the toilet, and it flushes all the waste on your toilet bowl.

How do I tell it’s time to change the batteries on my touchless toilet?

You just need to look at the indicator light. If it is blinking and red, it’s time to swap out the batteries.

What are the gurgling noises in my toilet?

Such noises are an indication of suction or negative air pressure. This can lead to clogging issues or even poor release of water.