There is no way to refute the fact that the technology that is used in smart homes has successfully assisted us in bettering many facets of our life.
Because of it, we are able to lead a life that is significantly less complicated and time-consuming than it was in the past. The Roomba is one example of a product of this kind that has simplified the process of cleaning a home.
This is especially true for people who are constantly on the go, such as busy professionals and business owners who don’t have the time to finish the cleaning cycle.
After the first setup, you won’t have to invest any additional time, and the cleaning robot will be able to go about the business of maintaining your home with ease.
On the other hand, this does not imply that you can ignore the robot without consequence for an unlimited amount of time.
In order to receive the best possible response from the system, there are a few more considerations that you need to keep in mind.
What to Do If Your Roomba Won’t Move Forward
The garbage should be emptied, hair should be removed from the brushes, and contact points should be checked, among many other things.
There have been numerous reports of customers struggling with various issues when attempting to utilize their Roombas.
They have mentioned that the Roomba equipment they have would not move. As a direct consequence of this, individuals are unable to effectively use the Roomba and maintain a clean home.
If you are experiencing a problem that is similar to the one described in the article and want to discover how you can resolve the problem, then we strongly advise you to continue reading the post.
Clean the Roomba
It’s possible that the trouble you’re having is caused in part by the fact that your robot is just dirty. This is just one of the potential explanations, though.
Because the vacuum cleaner is literally sucking up all of the debris for you, it is possible that it will become dirty over time. Because of this, it is essential to give the robot a good cleaning every once in a while.
It is likely that the sensors are malfunctioning within the robot as a result of the trash that has gathered inside of it. In either scenario, you will be required to give the robot a complete cleaning and make sure that any debris or filth that may be inside it is removed.
In a similar vein, there is always the possibility that your Roomba will encounter some kind of impediment along its course, or that the bumper will become jammed.
If that is the case, all that is required of you at this point is to back away from the Roomba so you can examine the bumper from below.
Check the Battery
The vast majority of Roomba users are unaware of the fact that power problems can potentially cause the device to have difficulties. There could be a broken pin inside the cable that is linked to the power supply, or the power supply could simply not be connected to an outlet that is working properly.
It is essential to check the battery of the Roomba since it is possible that the battery is either dead or has not been charged.
Make Sure Your Roomba is Fully Charged
After you have confirmed that the battery is in good condition, you should inspect the docking station to ensure that there are no issues with the charging base itself.
Checking in on the system won’t take more than a few minutes of your time, and clearing the contact points will be of use to you in this regard.
All that you have to do to make sure there is a correct connection between the cleaning unit and the contact points with the docking station is to make sure that there is a proper connection.
If there is any muck or debris in this area, it will simply cause the power supply to have even more problems, and the device will not function correctly. This is also true if you have recently purchased a new robot, as you will need to charge it for a minimum of a few hours before beginning the cleaning cycle on it.
Securing the correct flow of power between the system and the docking station is the single most important step in this process.
In addition to this, you can count on a multimeter to examine the output coming from the contact points. You will then have a better understanding of the circumstances, and you will be able to proceed with the cleaning process.
Reset the Roomba
In the event that you are not entirely certain about the problem, and it appears to be more connected to the programming side of things, then you will be required to perform a system reset.
When you discover that the software has a bug, there is no use in going through standard troubleshooting steps such as rebooting the system.
Resetting the system is the only option that makes sense logically and makes sense consistently for fixing this issue. Fixing this system will, in almost all cases, require you to invest little more than a few seconds of your time.
Having the device reset, however, can make the first configuration of it quite difficult. You will need to reset the configurations of the device and run through the entire setup process again from the beginning. This might look like a lot of work, but there are no other options available to you at this point.
From there, you may begin the process of mending the device without having to deal with any further difficulties down the line.
In an ideal world, all of the programming problems will have been repaired at this point, and you will then be able to check up on the motor as well as the pathway in order to determine other causes.
Check the Engine
It’s also possible that problems with the motor contributed to the scenario. When the motor itself is damaged, you will not be able to get the wheels to move in any direction. The only thing left for you to do is open up the bottom of the device and look at the motor inside of it.
On the other hand, if you still have time left on your warranty, you should not tamper with your device. Interfering with the internal circuitry in any way will result in the immediate termination of the warranty.
Therefore, you should not risk nulling the warranty and entrust this job to those who are trained to do it. You will be able to avoid any more issues while simultaneously saving a significant amount of time using this method.
If, on the other hand, you are not covered by a current warranty of any kind, then you need to investigate the wiring that is attached to the motor.
When the motor isn’t working properly, you can’t expect the wheels to move, and using a multimeter to check the connection between the wire and the battery would be helpful.
It all boils down to the movement of the wheels, and it will do you well to keep an eye on the power and the response of the engine.
With any luck, all of the faults will be fixed right now, and from this point forward, you won’t have to deal with any more errors.
Check For Obstacles
Sometimes the problem is not that bad, and in order to figure out what is going on, you will need to check up on the pathway in addition to the sensors.
More faults will occur as a result of missed setups if there is an excessive amount of gunk on the unit and you are unable to check up on the system.
If the sensors are clogged with crud, there is little purpose in continuing to check on the performance. Therefore, you should always begin by cleaning up the system, and then proceed to examine the path. Verify that the mapping is accurate and that there are no obstacles in the way.
After reaching this point, you will have another opportunity to run through the cleaning cycle. At this point, all faults should have been resolved; however, if this is not the case, then your robot is flawed.
The only sensible solution is to get in touch with the robot’s dealer, as there are no quick ways that can fix a damaged robot. You can check on the current status of the warranty either by contacting the official support staff or by contacting the dealer.
Contact Support
If you find that none of the methods work for you, then the best thing for you to do is get in touch with the support team so that they can help you further.
Inform them about the problem that you are struggling with at the moment. After reviewing your situation, they are obligated to help you as best they can.